S2000 PC Micro Sprinklers

“A year ago we installed Rivulis S2000 sprinkler heads. Nutrition is a big part of our banana crop; the Rivulis sprinkler head does the job well with perfect water droplets, angle and spread. I would strongly recommend the S2000 Rivulis sprinkler head as it has lived up to all our expectations”.

Charles Camuglia, Camuglia Farms (120 ha banana farm), Australia

Rivulis S2000 PC – The Next Sprinkler Revolution

The most advanced sprinkler yet

Introducing a micro sprinkler with easy take-apart body, low trajectory and anti-wear movement.

From the moment you hold an S2000, you will feel the strength of the construction. You know this is a sprinkler that will perform in tough conditions.
Then you open it up, and it is simple. Unlike other sprinklers that require multiple steps to open, S2000 is open in one click. Putting it back together is just as simple.

But in the field is where the S2000 really performs. At the start of a new season, although the sprinkler has not been used for months, you will be amazed at how reliably it starts up again

Simple: One Click Take-Apart Body

Save time in the field with S2000’s unique easy take-apart body in just one click!

Options: To Suit Your Unique Needs
Pressure Compensation (PC)

What does it do: Within a relatively large pressure range, ensures the same flow rate per sprinkler regardless of what the pressure is at that point of the tube. So the sprinkler at lower elevation will emit the same amount of water as the sprinkler at the highest point. PC also ensures the most accurate wetting diameter and water uniformity.

Where to use: Undulating ground and long-run lengths

Range Limiter

What does it do: A plastic tab is attached onto the spinner for use while trees are young. As the trees grow, simply break off the tab and the S2000 will perform at full wetting diameter for mature trees.

Where to use: Young orchards

Trunk Protector

What does it do: A deflector installed onto the bridge to guide water away from the trunks of trees

Where to use: In any application where you choose to protect trunk from water damage

Inlet Options

S2000 inlets offer three different inlet options to make retro fitting to existing systems easy.

5 mm threaded
5 mm Threaded
Conic Female
3/8″ THM

 

Unique easy take-apart body
for ease of maintenance
Low trajectory
to prevent fruit damage
Anti-insect protection
standard on all S2000 models
Wear-resistant movement
for long-term reliability
Pressure compensation
for longer run lengths and
use on undulating terrain

Model S2000 S2000 PC
Mechanism Micro Sprinkler
Pressure compensating / flow regulating N Y
Anti-Insect Standard on all models
Flow rates (l/h) 29, 37, 51, 61, 75, 97, 125, 170, 205, 260, 300 24, 31, 41, 53, 70, 95
Operating pressure (bar) 1.5 – 3.5
Wetting diameter (m) at 25 cm elevation 6.0 – 10.5 5.0 – 7.5
Inlets Conic female, 5 mm threaded, 3/8” THM 3/8” THM
Options Integral range limiter,  Trunk protector
Description Flow Rate
@ 2.0 bar (l/h)
Nozzle
Size (mm)
Nozzle
Colour
Spinner
Colour
Range
Limiter
Wetting Diameter (m)
25 cm above ground,
2.0 bar inlet pressure
(l/h) (mm)
3/8″ THM, Conic F, 5 mm Threaded
S2000 (3/8″) | 29 l/h 29 0.77 Light Blue Black N 6.5
S2000 (3/8″) | 37 l/h 37 0.85 Black Black N 6
S2000 (3/8″) | 51 l/h 51 1 Blue Black N 6.5
S2000 (3/8″) | 61 l/h 61 1.1 Dark Blue Black N 7
S2000 (3/8″) | 75 l/h 75 1.2 Green Black N 8
S2000 (3/8″) | 97 l/h 97 1.4 Red Black N 9
S2000 (3/8″) | 125 l/h 125 1.6 White Black N 10
3/8″ x Conic F,
5 mm Threaded
S2000 (3/8″) | 170 l/h 170 1.8 Violet Dark Blue N 9.5
S2000 (3/8″) | 205 l/h 205 2 Yellow Dark Blue N 10
3/8″ Threaded x Conic F
S2000 (3/8″) | 260 l/h 260 2.2 Brown Dark Blue N 10
S2000 (3/8″) | 300 l/h 300 2.4 Orange Dark Blue N 10.5
3/8″ THM x Conic F,
Conic F,
5 mm Threaded
S2000 (3/8″) | 29 l/h
(with range limiter)
29 0.77 Light Blue Black Y 1.0 (6.5 without range limiter)
S2000 (3/8″) | 37 l/h
(with range limiter)
37 0.85 Black Black Y 1 (6.0 without range limiter)
S2000 (3/8″) | 51 l/h
(with range limiter)
51 1 Blue Black Y 1.4 (6.5 without range limiter)
S2000 (3/8″) | 61 l/h
(with range limiter)
61 1.1 Dark Blue Black Y 1.4 (7.0 without range limiter)
S2000 (3/8″) | 75 l/h
(with range limiter)
75 1.2 Green Black Y 1.4 (8.0 without range limiter)
S2000 (3/8″) | 97 l/h
(with range limiter)
97 1.4 Red Black Y 1.4 (9.5 without range limiter)
S2000 (3/8″) | 125 l/h
(with range limiter)
125 1.6 White Black Y 2.0 (10.0 without range limiter)

 

Description Inlet Options Flow rate (l/h) Nozzle Colour Spinner Colour Range Limiter Wetting Diameter (m)
25 cm above ground
S2000 PC | 24 l/h 3/8” THM 24 Black Grey N 5
S2000 PC | 31 l/h 3/8” THM 31 Blue Grey N 5
S2000 PC | 41 l/h 3/8” THM 41 Dark Blue Grey N 5.5
S2000 PC | 53 l/h 3/8” THM 53 Green Grey N 6
S2000 PC | 70 l/h 3/8” THM 70 Red Grey N 7
S2000 PC | 95 l/h 3/8” THM 95 White Grey N 7.5
S2000 PC | 24 l/h (with range limiter) 3/8” THM 24 Black Grey Y 1.0 – 1.5 (5.0 without range limiter)
S2000 PC | 31 l/h (with range limiter) 3/8” THM 31 Blue Grey Y 1.0 – 1.5 (5.0 without range limiter)
S2000 PC | 41 l/h (with range limiter) 3/8” THM 41 Dark Blue Grey Y 1.0 – 1.5 (6.0 without range limiter)
S2000 PC | 53 l/h (with range limiter) 3/8” THM 53 Green Grey Y 1.0 – 1.5 (6.0 without range limiter)
S2000 PC | 70 l/h (with range limiter) 3/8” THM 70 Red Grey Y 1.0 – 1.5 (7.0 without range limiter)
S2000 PC | 95 l/h (with range limiter) 3/8” THM 95 White Grey Y 1.0 – 1.5 (7.5 without range limiter)

 

S2000 with meteor adaptor & cantal stake
S2000 with meteor adaptor hanging from LDPE
S2000 with snap-off range limiter for young trees

Meteor Adaptors

All Meteor Adaptors are rated to 135 l/h flow rate with the exception of Meteor Adaptor #14 which is rated to 300 l/h flow.

Description Description Connection
Meteor adaptor #44 (3/8"F x 4/7) Barbed - connect to 4/7 feeder tube
Meteor adaptor #44 (3/8" F x 4/7) assembled with 60 cm 4/7 PVC tube and connector Pre-assembled. Insert directly into LDPE hose
Meteor adaptor #44 (3/8" F x 4/7) assembled with 120 cm 4/7 tube and connector
Meteor adaptor #20 (3/8" F x 5 mm threaded) Threaded - connect to 4/7 feeder tube
Meteor adaptor #47 (3/8" F x 4/7) Barbed - connect to 4/7 feeder tube
Meteor adaptor #66 (3/8" F x 1/2" M) Threaded - connect to 1/2" F threaded connection
Meteor adaptor #14 (3/8" F x 10 mm) HIGH FLOW Barbed - connect to 10/12 feeder tube

 

Description Product Information
1 1.2 m Metal Rod (8 mm diameter) For use with meteor adaptor
2 Cantal Stake For use with meteor adaptor 35, 45 & 60 cm also available
3 Super Hammer Stake (4/7 inlet) 3/8″ F outlet stake
4 Super Hammer Stake assembled with 60 cm 4/7 tube & connector assembly 3/8″ F outlet stake pre-assembled with 4/7 tube and connector