D2000 Drip Line

D2000 Drip Line Features

  • Suitable for varying water conditions
  • Innovative hydraulic dripper design
  • Large surface inlet filter and cross sectional labyrinth
  • Easy manual or mechanized layout and retrieval
  • Significant clogging reduction for all flow rates
BIGGER IS BETTER: D2000 – THE BIG EMITTER

When you are using a medium or heavy wall tube, you want an emitter which will perform for multiple seasons without failing.

Introducing the D2000 emitter.
Developed using the latest in drip line engineering technology, the mandate for the emitter was to build a product that did not compromise on size or features.

BETTER ENGINEERING: OVER 85 INLETS PER EMITTER

Featuring 14–45% larger inlet area than the leading competing emitters, D2000 doesn’t just stop there. Unlike conventional emitters that only have a single flow direction into the labyrinth, D2000 has a dual-directional flow to maximize every inlet.

 

 

 

 

 

HIGH VELOCITY: INCREASED PARTICLE MOVEMENT
The D2000 is a deep emitter. The emitter design places the inlet filters away from the tube edge in higher velocity areas. This higher velocity helps increase agitation around inlets and prevent foreign particles from settling.

 

 

Drip Line D2000 moulded emitter
Flow Rates (lph) 1.0, 1.5, 2.0, 4.0, 8.0
Standard Dripper Spacings (cm) 15, 20, 25, 30, 40, 50, 60, 75
Nominal Drip Line Diameter (mm) 16, 20
Drip Line Wall Thickness For 16 mm – 30, 35, 40 and 45 mil (0.76 0.89 1.02 1.14 mm)
For 20 mm – 40 mil (1.02 mm)
Nominal Wall Thickness Internal Flow Rate Maximum Operating Pressure Roll Length Maximum Run Length (10% Flow Variation)
Spacing between Drippers (cm)
Ø Ø 20 30 40 50 60 75 100
(mm) (mil) (mm) (mm) (l/h) (bar) (m) (m) (m) (m) (m) (m) (m) (m)
16 30 1 13.8 1.0 2.5 600 81 108 132 152 173 201 243
16 30 1 13.8 1.5 2.5 600 62 83 101 118 133 152 186
16 30 1 13.8 2.0 2.5 600 51 69 84 98 110 128 153
16 30 1 13.8 4.0 2.5 600 33 44 54 62 70 82 99
16 35 1 13.8 1.0 3.0 500 79 105 128 150 169 196 236
16 35 1 13.8 1.5 3.0 500 61 82 100 116 131 152 184
16 35 1 13.8 2.0 3.0 500 52 69 84 98 111 128 155
16 35 1 13.8 4.0 3.0 500 33 44 54 63 71 83 100
16 40 1 13.8 1.0 3.0 400 81 106 131 152 172 200 242
16 40 1 13.8 1.5 3.0 400 62 82 100 117 132 152 185
16 40 1 13.8 2.0 3.0 400 52 70 85 100 112 131 157
16 40 1 13.8 4.0 3.0 400 33 45 54 64 72 83 101
16 45 1 13.8 1.0 3.0 400 82 109 133 155 175 203 245
16 45 1 13.8 1.5 3.0 400 62 83 101 117 133 152 185
16 45 1 13.8 2.0 3.0 400 52 70 85 100 112 131 157
16 45 1 13.8 4.0 3.0 400 33 44 54 63 71 82 99
20 40 1 17.6 1.0 3.0 450 121 161 196 227 257 297 353
20 40 1 17.6 2.0 3.0 450 80 106 130 151 170 197 237
20 40 1 17.6 4.0 3.0 450 52 68 83 97 109 127 153
Product Max flow rate difference: 7,5%Spacing between drippers (cm) Max flow rate difference: 10%Spacing between drippers (cm)
(mm/ mil/ l/h) 30 40 50 75 100 30 40 50 75 100
16/35/2 60 74 86 112 135 69 84 98 128 155
16/35/4 38 47 55 72 87 44 54 63 83 100
16/40/2 61 74 87 113 137 70 85 100 131 157
16/40/4 39 48 56 73 88 45 54 64 83 101

Key System Components

Air Reliefair_relief_parent_page_image Valve
  • Premium resins
  • Long lasting performance
  • Three types of valves: Air & Vacuum, Automatic, and Combination
Drip Line Fittingsdripline-fitting-cropped
  • High quality fittings for drip lines
  • Insert line includes couplers, reducers, start connectors, clamps, and barbed fittings

F2000 Media Filter

F2000 Media Filters (gravel or sand) are the most efficient type of filtration of water heavily
contaminated with algae, organic matter and other impurities found in open reservoirs, canals and recycled water systems.

F3200 Metal Screen Filter with Hydraulic Operation

Great for drip irrigation systems, the F3200 Metal Screen Filter with Hydraulic Operation is highly efficient and self-cleaning. The filters continue to operate during flushing and utilize a small amount of water during flushing, making the filters very efficient.

Air Reliefair_relief_parent_page_image
Layflat

Pro-Flat Premium PVC Layflat and T-Tape Layflat are made with premium resins which allow the product to withstand the tough farming conditions. Pro-Flat resists elongation and rotation and T-Tape Layflat is made with homogenous construction.

Drill Bits

Used to drill holes in PVC manifolds. Use grommets when start connectors are inserted into
PVC manifolds.

Hole Punches

To insert Pro-Grip fittings into PE Max-Flat or Hose use either the B400 Hole punch or B700 Hole Punch. These hole punch tools create the hole and insert the fitting in one step.

Layflat Cutters

The Layflat cutters are available in 14, 16, and 19 mm sizes. The 19 mm Layflat cutter is designed to work with the Pro-Grip layflat take-off fittings.

Layflat Spanner and Tee Hex Wrenches

The Spanner and Tee Hex Wrenches help to make installations easier with Pro-Grip Layflat fittings into layflat hoses.