S2000 PC Micro Sprinklers

S2000 Micro Sprinkler Features

  • Ideal for a wide range of applications
  • Built-in anti-insect device
  • Wear resistant design

Rivulis S2000 PC – The Next Sprinkler Revolution

The most advanced sprinkler yet

Introducing a micro sprinkler with easy take-apart body, low trajectory and anti-wear movement.

From the moment you hold an S2000, you will feel the strength of the construction. You know this is a sprinkler that will perform in tough conditions.
Then you open it up, and it is simple. Unlike other sprinklers that require multiple steps to open, S2000 is open in one click. Putting it back together is just as simple.

But in the field is where the S2000 really performs. At the start of a new season, although the sprinkler has not been used for months, you will be amazed at how reliably it starts up again

Simple: One Click Take-Apart Body

Save time in the field with S2000’s unique easy take-apart body in just one click!

Options: To Suit Your Unique Needs
Pressure Compensation (PC)

What does it do: Within a relatively large pressure range, ensures the same flow rate per sprinkler regardless of what the pressure is at that point of the tube. So the sprinkler at lower elevation will emit the same amount of water as the sprinkler at the highest point. PC also ensures the most accurate wetting diameter and water uniformity.

Where to use: Undulating ground and long-run lengths

Range Limiter

What does it do: A plastic tab is attached onto the spinner for use while trees are young. As the trees grow, simply break off the tab and the S2000 will perform at full wetting diameter for mature trees.

Where to use: Young orchards

Trunk Protector

What does it do: A deflector installed onto the bridge to guide water away from the trunks of trees

Where to use: In any application where you choose to protect trunk from water damage

Inlet Options

S2000 inlets offer three different inlet options to make retro fitting to existing systems easy.

5 mm threaded
5 mm Threaded
Conic Female
3/8″ THM

 

Unique easy take-apart body
for ease of maintenance
Low trajectory
to prevent fruit damage
Anti-insect protection
standard on all S2000 models
Wear-resistant movement
for long-term reliability
Pressure compensation
for longer run lengths and
use on undulating terrain

Operating pressure range 1,5 to 3,5 bar
Nominal pressure 2,0 bar
Filtration Requirements
Microns 200
Mesh 80
Spinner Colors Black, Dk. Blue, Grey
Nozzle Colors Lt. Blue, Black, Blue, Dk. Blue, Green, Red, White, Purple, Yellow, Brown, Orange
Flow Rates 29 to 300
Spray Diameter 1,0 to 10,5 m
Special Features Range limiter, Flow regulated
Fitting 3/8″ Conic
S2000 Micro Sprinkler – 3/8″ / Female Conic
Spinner Color Black
Nozzle Colors Flow Rate (l/h) Spray Diameter (m) Diameter w/Range Limiter (m)
Lt. Blue 29 6,5 1,0
Black 37 6,0 1,0
Blue 51 6,5 1,4
Dk. Blue 61 7,0 1,4
Green 75 8,0 1,4
Red 97 9,0 1,4
White 125 10,0 2,0
Spinner Color Dk. Blue
Nozzle Colors Flow Rate (l/h) Spray Diameter (m)
Purple 170 9,5
Yellow 205 10,0
Brown 260 10,0
Orange 300 10,5

 

S2000 Micro Sprinklers Assemblies
Assembly Sprinkler, meteor adapter, Cantal Stake, PE Tubing, 4×7 coupling
Sprinkler Fitting 3/8″ / Conic
Adapter Meteor 44
Tube 60 Cm
Spinner Color Black
Nozzle Colors Flow Rate (l/h)
Lt. Blue 29
Black 37
Blue 51
Dk. Blue 61
Green 75
Red 97
White 125
S2000 Flow Regulated Micro Sprinkler
Fitting 3/8″ / Conic
Special Feature Range Limiter
Spinner Color Grey
Nozzle Colors Flow Rate (l/h) Spray Diameter (m) Spray Diameter w/Range Limiter
Black 24 5,0 1,0 – 1,5
Blue 31 5,0 1,0 – 1,5
Green 53 6,0 1,0 – 1,5
Red 74 7,0 1,0 – 1,5
White 95 7,5 1,0 – 1,5

 

S2000 Flow Regulated Micro Sprinkler Assemblies
Assembly Sprinkler, meteor adapter, Cantal Stake, PE Tubing, 4×7 coupling
Sprinkler Fitting 3/8″ / Conic
Adapter Meteor 44
Tube 60 Cm
Spinner Color Grey
Nozzle Colors Flow Rate (l/h)
Black 24
Blue 31
Green 53
Red 74
White 95
S2000 with meteor adaptor & cantal stake
S2000 with meteor adaptor hanging from LDPE
S2000 with snap-off range limiter for young trees

S2000 Flow Regulated – Max. recommended no. of sprinklers on flat terrain (0% slope)

Nozzle Flow rate(lph) Tube diameter OD/ID (mm) Lateral inlet pressure (bar) Spacing between Drippers (m)
2 3 4 5 6 7 8
Black 24 16/13,6 2,0 24 20 19 17 16 15 14
3,0 39 34 31 28 27 25 24
3,5 45 38 35 32 30 28 27
17,8/15,2 2,0 30 25 23 21 20 18 17
3,0 49 42 38 34 33 30 29
3,5 55 47 43 39 37 34 33
20/17,4 2,0 37 32 29 27 25 24 22
3,0 61 53 47 44 41 39 37
3,5 69 60 54 50 46 44 42
Blue 31 16/13,6 2,0 20 17 16 14 14 13 12
3,0 33 29 26 24 23 22 20
3,5 38 33 30 27 26 24 23
17,8/15,2 2,0 25 21 19 17 17 16 15
3,0 41 35 32 29 28 26 25
3,5 46 40 36 33 31 29 28
20/17,4 2,0 31 27 24 23 21 20 19
3,0 52 44 40 37 34 33 31
3,5 59 50 45 42 39 37 35
Green 53 16/13,6 2,0 14 13 11 11 10 9 9
3,0 24 21 18 18 16 15 14
3,5 27 23 21 20 18 17 16
17,8/15,2 2,0 17 15 14 13 12 11 11
3,0 29 25 23 21 19 18 18
3,5 33 28 26 24 22 20 20
20/17,4 2,0 22 19 17 16 15 14 14
3,0 37 32 28 26 24 23 23
3,5 42 36 32 30 28 26 25
Red 74 16/13,6 2,0 12 10 9 8 7 8 7
3,0 19 17 15 14 13 13 12
3,5 22 19 17 15 14 14 14
17,8/15,2 2,0 10 9 7 8 7 6 6
3,0 21 19 16 16 15 14 13
3,5 25 22 19 18 17 16 15
20/17,4 2,0 19 16 15 14 13 12 12
3,0 27 24 22 20 18 17 17
3,5 32 27 25 23 21 20 20
White 95 16/13,6 2,0 7 6 5 5 5 5 4
3,0 16 13 11 11 10 10 9
3,5 18 15 13 13 12 11 11
17,8/15,2 2,0 8 8 7 6 5 6 6
3,0 18 16 14 13 12 12 12
3,5 21 19 17 15 14 14 13
20/17,4 2,0 11 10 8 7 8 7 7
3,0 23 20 18 16 16 15 14
3,5 27 24 21 19 18 17 16

Meteor Adaptors

All Meteor Adaptors are rated to 135 l/h flow rate with the exception of Meteor Adaptor #14 which is rated to 300 l/h flow.

Description Description Connection
Meteor adaptor #44 (3/8"F x 4/7) Barbed - connect to 4/7 feeder tube
Meteor adaptor #44 (3/8" F x 4/7) assembled with 60 cm 4/7 PVC tube and connector Pre-assembled. Insert directly into LDPE hose
Meteor adaptor #44 (3/8" F x 4/7) assembled with 120 cm 4/7 tube and connector
Meteor adaptor #20 (3/8" F x 5 mm threaded) Threaded - connect to 4/7 feeder tube
Meteor adaptor #47 (3/8" F x 4/7) Barbed - connect to 4/7 feeder tube
Meteor adaptor #66 (3/8" F x 1/2" M) Threaded - connect to 1/2" F threaded connection
Meteor adaptor #14 (3/8" F x 10 mm) HIGH FLOW Barbed - connect to 10/12 feeder tube

 

Description Product Information
1 1.2 m Metal Rod (8 mm diameter) For use with meteor adaptor
2 Cantal Stake For use with meteor adaptor 35, 45 & 60 cm also available
3 Super Hammer Stake (4/7 inlet) 3/8″ F outlet stake
4 Super Hammer Stake assembled with 60 cm 4/7 tube & connector assembly 3/8″ F outlet stake pre-assembled with 4/7 tube and connector