T-Tape Drip Tape

T-Tape Drip Tape Features

  • Turbulent-flow dripper technology provides a high level of flow rate uniformity
  • White stripe with product information for easier installation and storage
  • Self-closing slit outlet (ideal for SDI systems)
  • Install on the ground, under opaque plastic, or even subsurface

Outstanding Agronomic Performance

BEST AGRONOMIC PERFORMANCE

The benefits of closer emitter spacing are numerous, but are all related to more effective water movement.

When irrigating, you want water to move laterally, not deep down through the soil profile where it is either lost (including any fertilizers added) or is harder for plants to uptake. By keeping emitters spaced at close intervals, water flows laterally quicker, ensuring a continued wet strip along the row. In addition, more emitters per meter provides greater protection against crop loss if an emitter becomes blocked.

A great thing is when you use T-Tape, closer emitter spacing intervals do not need to come at an extra cost. Because Rivulis T-Tape has emitters manufactured into the tape itself, as opposed to inserted molded emitters, there is no cost difference per meter between 10 emitters per meter (10 cm spacing) and two emitters per meter (50 cm spacing).

T-Tape helps make your choice of emitter interval spacing an agronomic decision, not one based on your bank account.

NO COMPROMISE: WIDE RANGE OF CONFIGURATIONS

The problem with many drip systems is that you cannot always get the ideal configuration for your unique requirements. Therefore you compromise and in turn, may not achieve the optimum results possible.

Compromise is not an issue when you choose T-Tape which features one of the widest ranges of configurations available including:

7 x Flow rate options from 0.25 l/h – 4.0 l/h
Choose depending on your individual crop, environment and soil requirements

4 x Diameters: 16, 22, 29 and 35 mm.
Larger diameters allow for longer-run lengths while still achieving high uniformity

7 x Wall thickness options: 5 – 15 mil (0.13 – 0.38 mm)
Heavier wall thicknesses are ideal for multi-season, long-term sub-surface, or where additional strength is required

EASY PRODUCT IDENTIFICATION

 

 

 

 

Diameters 16, 22, 29 mm
Wall Thickness 5, 6, 7, 8, 10, 15 mil
Dripper Spacings 10, 15, 20, 30, 40, 50 cm
Flow Rates 125 – 1350 LPH/100 m
Diameter / Emitter Spacing Flow Rate Roll Length
Wall Thickness (cm) (lph / 100m) (m)
16 mm – 500 Series
5 mil 10, 15, 20, 30 90, 125, 170, 250, 340, 380, 500, 750 3658, 3962
6 mil 10, 15, 20, 30, 40 125, 170, 250, 340, 380, 500, 750, 1000, 1350 3050
7 mil 10, 15, 20, 30 250, 500, 1000, 1350 1400, 2800
8 ml 10, 15, 20, 30, 40 125, 170, 190, 250, 340, 380, 500, 750, 1000, 1350 500, 1150, 2300
10 mil 10, 15, 20, 30 40,60, 90 170, 230, 250, 340, 380, 500, 750, 1000 1830
12 mil 12, 20, 30 250, 340, 500 1550
15 mil 20, 30, 40, 50 185, 250, 315, 340, 380, 500 1250
22 mm – 700 Series
6 mil 15, 20, 25, 30 170, 250, 300, 340, 500 2250
7 mil 20, 30 250, 340, 500 1972
8 mil 20, 30 170, 250, 340, 380, 500 1695
10 mil 15, 20, 30 170, 250, 340, 380, 500 1220, 1340
12 mil 12, 20, 30 170, 250, 340, 500 1135
15 mil 20, 30, 40 170, 185, 210, 250, 315, 340 823, 915, 1585
29 mm – 900 Series
8 mil 30 250 1700
Recommended operating pressure: 0,55 bar
Flow rate per outlet: 0,5-1,35 lph
Product Options
Wall Thickness 5, 6, 7, 8, 10, 15 mil
Dripper Spacings 10, 15, 20, 30, 40, 50, 60, 90 cm
Rolls per Pallet Container: 16
Truck: 20
Roll Weight 29 Kg
Roll Length 500 – 3962 m

 

Operating Guidelines
Recommended operating pressure 0,55 bar

 

Operating Pressure by Model
Model Operating Pressure (bar)
505, 706, 707, 908 0,30 – 0,56
506, 708 0,30 – 0,70
508, 510, 512, 515 0,30 – 1,05
710, 712, 715 0,30 – 1,05

Due to T-Tape’s unique design, the tape is folded and welded over itself, in turn creating a strong seam along the entire length of the tape.

Double thickness along the seam helps make T-Tape stronger and therefore easier to retrieve in the field.

In addition, the seam provides an extra layer of protection to the emitter. T-Tape is designed to snap instead of stretch, with the seam design helping protect the in-built emitter from damage, both during installation and retrieval.

Roll Length – 16 mm
5 mil 3658, 3962 m
6 mil 3050 m
7 mil 1400, 2800 m
8 mil 500, 1150, 2300 m
10 mil 1830 m
12 mil 1550 m
15 mil 1250 m

 

Roll Length – 22 mm
6 mil 2250 m
7 mil 1972 m
8 mil 1695 m
10 mil 1220, 1340 m
12 mil 1135 m
15 mil 823, 915, 1585 m

 

Roll Length – 29 mm
8 mil 1700 m

COMMON FILTRATION REQUIREMENTS FOR MOST APPLICATIONS

> 0.5 l/h per emitter: 130 micron / 120 mesh
≤ 0.5 l/h per emitter: 100 micron / 150 mesh

Filtration requirement is dependent on a number of factors including water source and application. Please consult with an irrigation specialist for filtration requirements for your specific application.

PRESSURE GUIDELINES
Minimum operating pressure: 0.30 bar
Recommended operating pressure: 0.55 bar

If you need even more tensile strength than T-Tape drip tape’s already reinforced design, T-TapeS is your answer.
Manufactured with some of the most advanced extrusion technology in drip irrigation, T-TapeS provides outstanding tensile strength making it ideal for situations where retrieval may be a challenge.


T-TapeS is easily identified with its signature green stripe (Europe only).

Description Nominal
Ø
Wall Thickness
(Nominal)
Spacing Flow Rates Maximum
Run Length
(90% E.U.)
Roll
Length
Product Number
(mil) (mm) (cm) (l/h per emitter) (l/h per 100m) (m) (m)
T-TapeS | 505-15-170 16mm (5/8″) 5 0.13 15 0.25 170 205 3655 WT14682
T-TapeS | 505-20-125 16mm (5/8″) 5 0.13 20 0.25 125 245 3655 WT14683
T-TapeS | 505-22.5-110 16mm (5/8″) 5 0.13 22.5 0.25 110 250 3655 WT14685
T-TapeS | 506-15-170 16mm (5/8″) 6 0.15 15 0.25 170 205 3050 WT13929
T-TapeS | 506-15-500 16mm (5/8″) 6 0.15 15 0.75 500 110 3050 101049169
T-TapeS | 506-20-125 16mm (5/8″) 6 0.15 20 0.25 125 245 3050 WT14688
T-TapeS | 506-20-500 16mm (5/8″) 6 0.15 20 1 500 115 3050 101047870
T-TapeS | 506-30-170 16mm (5/8″) 6 0.15 30 0.5 170 230 3050 WT14691
T-TapeS | 506-30-250 16mm (5/8″) 6 0.15 30 0.75 250 180 3050 101049143
T-TapeS | 506-30-340 16mm (5/8″) 6 0.15 30 1 340 150 3050 101049142
T-TapeS | 706-15-170 22mm (7/8″) 6 0.15 15 0.25 170 355 2250 WT13928
T-TapeS | 706-20-200 22mm (7/8″) 6 0.15 20 0.4 200 330 2250 WT14693
T-TapeS | 706-20-250 22mm (7/8″) 6 0.15 20 0.5 250 310 2250 101046259
T-TapeS | 706-30-170 22mm (7/8″) 6 0.15 30 0.5 170 405 2250 WT14697
T-TapeS | 706-30-250 22mm (7/8″) 6 0.15 30 0.75 250 315 2250 WT15709
T-TapeS | 706-30-340 22mm (7/8″) 6 0.15 30 1 340 265 2250 WT15217

Flow rate calculated at 0.55 bar. Maximum run length based on 90% Emission Uniformity on flat ground.