T-Tape Drip Tape

T-Tape Drip Tape Features

  • Turbulent-flow dripper technology provides a high level of flow rate uniformity
  • White stripe with product information for easier installation and storage
  • Self-closing slit outlet (ideal for SDI systems)
  • Install on the ground, under opaque plastic, or even subsurface

 

One of the most recognized and trusted drip tape brands in the world, T-Tape Drip Tape is used in a variety of crops around the world to help reduce water consumption, increase crop quality, and increase crop yields. T-Tape Drip Tape can be installed on the ground, under plastic, or even subsurface. Because of T-Tape’s material strength, design, and quality production standards, it’s the drip tape that you can count on year after year.

T-Tape is available in a wide assortment of configurations, including various lengths, wall thickness, emitter spacings and flow rates. Helping growers match individual growing situations with maximum yield benefits.

Applications

  • Surface
  • Under Mulch (buried)
  • Subsurface

Suggested Use of T-Tape Drip Tape

5/8″ (5 mil): Short season crops in medium tilled soils that contain slight residue from a previous crop. Beneficial for crops such as strawberries, melons and onions.

5/8″ (6 mil): Minimum tilled soils, double cropping, medium textured soils or where rocks or previous crop residue is a factor. Commonly used in tomatoes, peppers, melons and strawberries.

5/8″ and 7/8″ (8 mil): Minimum tilled soils, double cropping, heavier tilled soils, or where more resistance to abrasion and insect damage is desired. Used in peppers, tomatoes, melons and vegetable crops.

5/8″ and 7/8″ (10 mil): Heavy or rocky soil, where insects are a problem, where it is to be moved or reused for multiple seasons.

5/8″ and 7/8″ (15 mil): Heavier soil or soils presenting rougher terrain where insects are a stronger threat, even small animals. Used in sugarcane, asparagus and SDI applications. T-Tape is the solution to the challenges faced by growers. T-Tape was developed to meet the individual grower’s needs.

Product Options
Diameters: ⅝”, ⅞”, 1⅛”, 1⅜”
Wall Thickness: 5 – 15 mil
Flow Rates: 0.11- 1.34 gpm/ 100 ft.
Average Roll Weight: 65 lbs.

 

Operating Guidelines
Minimum operating pressure: 4 PSI
Recommended operating pressure: 8 PSI

 

Maximum operating pressures:
Wall Diameter
(mil) 5/8” 7/8” 1 1/8” 1 3/8”
5 6
6 10
8 15 10 8
10 15 15 10
12 15 15 12
15 15 15 15 15

 

Roll Length
Dia. (inch) Wall (mil) Roll length (ft)
5/8 5 12,000
6 10,000
8 7,500
10 6,000
12 5,100
15 4,100
7/8 6 7,380
8 5,560
10 4,400
12 3,724
15 3,002
1 ⅛ 8 5,580
10 4,410
12 3,775
15 3,035
1 ⅜ 15 2,700

T-TapeS – Ultra Low Flow – 5/8″ or 7/8″

Recommended Filtration Mesh Micron
270 53
Dia. Wall Spacing Flow Rate* Roll Flow Max. Op. Max. Flush Max. Length
length Rate* Pressure Pressure of Run**
(inch) (mil) (inch) (gpm/100 ft) (ft) (gph) (psi) (psi) (ft)
5/8 5 6 0.22 12,000 0.07 8 11 685
5/8 5 8 0.17 12,000 0.07 8 11 790
5/8 5 9 0.15 12,000 0.07 8 11 850
5/8 6 6 0.22 10,000 0.07 10 13 770
5/8 6 8 0.17 10,000 0.07 10 13 790
7/8 6 6 0.22 7,380 0.07 8 10 1335
7/8 6 8 0.27 7,380 0.07 8 10 1200

 

*Flow rates calculated at 8 psi.
**Length of runs calculated using Hydraulic Tool.
***Flow rate per dripper.
Product Information Operating Data
Dia.
(inch)
Wall
(mil)
Spacing
(inch)
Flow Rate*
(gpm /100 ft)
Flow
Rate *(gph)
Flow
Rate Class
Rec. Filtration Max. Op.
Pressure (psi)
Max. Flush
Pressure (psi)
Max .Length
of Run** (ft)
(mesh) (micron)
5/8 5 4 1.00 0.20 Med. 150 100 8 11 285
5/8 5 6 0.67 0.20 Med. 150 100 8 11 375
5/8 5 8 0.34 0.14 Low 200 80 8 11 595
5/8 5 8 0.45 0.18 Med. 150 100 8 11 490
5/8 5 8 0.50 0.20 Med. 150 100 8 11 450
5/8 5 8 0.67 0.27 Med. 150 100 8 11 375
5/8 5 12 0.45 0.27 Med. 150 100 8 11 490
5/8 6 4 1.00 0.20 Med. 150 100 10 13 285
5/8 6 6 0.45 0.14 Low 200 80 10 13 445
5/8 6 6 0.67 0.20 Med. 150 100 10 13 375
5/8 6 8 0.34 0.14 Low 200 80 10 13 595
5/8 6 8 0.50 0.20 Med. 150 100 10 13 450
5/8 6 8 0.67 0.27 Med. 150 100 10 13 375
5/8 6 12 0.34 0.20 Med. 150 100 10 13 595
5/8 6 12 0.45 0.27 Med. 150 100 10 13 490
5/8 6 16 0.34 0.27 Med. 150 100 10 13 595
5/8 8 4 1.00 0.20 Med. 150 100 15 18 285
5/8 8 6 0.45 0.14 Low 200 80 15 18 490
5/8 8 6 1.34 0.40 High 150 100 15 18 240
5/8 8 8 0.34 0.14 Low 200 80 15 18 580
5/8 8 8 0.50 0.20 Med. 150 100 15 18 450
5/8 8 8 0.67 0.27 Med. 150 100 15 18 375
5/8 8 12 0.22 0.13 Low 200 80 15 18 770
5/8 8 12 0.34 0.20 Med. 150 100 15 18 595
5/8 8 12 0.45 0.27 Med. 150 100 15 18 490
5/8 8 16 0.17 0.14 Low 200 80 15 18 930
5/8 8 16 0.34 0.27 Med. 150 100 15 18 595
5/8 10 6 1.34 0.40 High 120 130 15 22 240
5/8 10 8 0.34 0.14 Low 200 80 15 22 595
5/8 10 8 0.50 0.20 Med. 150 100 15 22 450
5/8 10 8 0.67 0.27 Med. 150 100 15 22 375
5/8 10 12 0.22 0.13 Low 200 80 15 22 770
5/8 10 12 0.34 0.20 Med. 150 100 15 22 595
5/8 10 12 0.45 0.27 Med. 150 100 15 22 490
5/8 10 16 0.34 0.27 Med. 150 100 15 22 595
5/8 10 30 0.25 0.38 High 120 130 15 22 720
5/8 12 12 0.45 0.27 Med. 150 100 15 26 490
5/8 15 8 0.50 0.20 Med. 150 100 15 33 450
5/8 15 8 0.67 0.27 Med. 150 100 15 33 375
5/8 15 12 0.45 0.27 Med. 150 100 15 33 490
*Flow rates calculated at 8 psi.
** Length of runs calculated using Hydraulic Tool.
Product Information Operating Data
Dia.
(inch)
Wall
(mil)
Spacing
(inch)
Flow Rate*
(gpm /100 ft)
Flow
Rate *(gph)
Flow
Rate Class
Rec. Filtration Max. Op.
Pressure (psi)
Max. Flush
Pressure (psi)
Max .Length
of Run** (ft)
(mesh) (micron)
7/8 6 8 0.34 0.14 Low 200 80 8 10 1030
7/8 8 8 0.34 0.14 Low 200 80 10 12 1030
7/8 8 8 0.50 0.20 Med 150 100 10 12 795
7/8 8 8 0.67 0.27 Med 150 100 10 12 665
7/8 8 12 0.22 0.13 Low 200 80 10 12 1350
7/8 8 12 0.34 0.20 Med 150 100 10 12 1030
7/8 8 12 0.45 0.27 Med 150 100 10 12 865
7/8 10 6 0.45 0.14 Low 200 80 15 16 865
7/8 10 8 0.34 0.14 Low 200 80 15 16 1030
7/8 10 8 0.67 0.27 Med 150 100 15 16 665
7/8 10 12 0.34 0.20 Med 150 100 15 16 1030
7/8 10 12 0.45 0.27 Med 150 100 15 16 865
7/8 12 8 0.34 0.14 Low 200 80 15 19 1030
7/8 12 12 0.27 0.16 Low 200 80 15 19 1200
7/8 12 12 0.45 0.27 Med 150 100 15 19 865
7/8 15 8 0.34 0.14 Low 200 80 15 23 1030
7/8 15 8 0.67 0.27 Med 150 100 15 23 665
7/8 15 12 0.22 0.13 Low 200 80 15 23 1350
7/8 15 12 0.22 0.13 Low 200 80 15 23 1350
7/8 15 12 0.22 0.13 Low 200 80 15 23 1350
7/8 15 12 0.34 0.20 Med 150 100 15 23 1030
7/8 15 12 0.45 0.27 Med 150 100 15 23 865
7/8 15 16 0.28 0.23 Med 150 100 15 23 1165
*Flow rates calculated at 8 psi.
** Length of runs calculated using Hydraulic Tool.
Product Information Operating Data
Dia.
(inch)
Wall
(mil)
Spacing
(inch)
Flow Rate*
(gpm /100 ft)
Flow
Rate *(gph)
Flow
Rate Class
Rec. Filtration Max. Op.
Pressure (psi)
Max. Flush
Pressure (psi)
Max .Length
of Run** (ft)
(mesh) (micron)
1 ⅛ 8 12 0.34 0.20 Med 150 100 8 10 1583
1 ⅛ 8 12 0.45 0.27 Med 150 100 8 10 1336
1 ⅛ 10 12 0.34 0.20 Med 150 100 10 12 1583
1 ⅛ 12 12 0.34 0.20 Med 150 100 12 15 1583
1 ⅛ 15 12 0.22 0.13 Low 200 80 15 18 2045
1 ⅛ 15 12 0.34 0.20 Med 150 100 15 18 1583
1 ⅛ 15 12 0.45 0.27 Med 150 100 15 18 1350
Product Information Operating Data
Dia.
(inch)
Wall
(mil)
Spacing
(inch)
Flow Rate*
(gpm /100 ft)
Flow
Rate *(gph)
Flow
Rate Class
Rec. Filtration Max. Op.
Pressure (psi)
Max. Flush
Pressure (psi)
Max .Length
of Run** (ft)
(mesh) (micron)
1 ⅜ 15 12 0.22 0.13 Low 200 80 15 16 2876
1 ⅜ 15 12 0.34 0.20 Medium 150 100 15 16 2232
1 ⅜ 15 12 0.45 0.27 Medium 150 100 15 16 1884

Diameters 16, 22, 29 mm
Wall Thickness 5, 6, 7, 8, 10, 15 mil
Dripper Spacings 10, 15, 20, 30, 40, 50 cm
Flow Rates 125 – 1350 LPH/100 m
Diameter / Emitter Spacing Flow Rate Roll Length
Wall Thickness (cm) (lph / 100m) (m)
16 mm – 500 Series
5 mil 10, 15, 20, 30 90, 125, 170, 250, 340, 380, 500, 750 3658, 3962
6 mil 10, 15, 20, 30, 40 125, 170, 250, 340, 380, 500, 750, 1000, 1350 3050
7 mil 10, 15, 20, 30 250, 500, 1000, 1350 1400, 2800
8 ml 10, 15, 20, 30, 40 125, 170, 190, 250, 340, 380, 500, 750, 1000, 1350 500, 1150, 2300
10 mil 10, 15, 20, 30 40,60, 90 170, 230, 250, 340, 380, 500, 750, 1000 1830
12 mil 12, 20, 30 250, 340, 500 1550
15 mil 20, 30, 40, 50 185, 250, 315, 340, 380, 500 1250
22 mm – 700 Series
6 mil 15, 20, 25, 30 170, 250, 300, 340, 500 2250
7 mil 20, 30 250, 340, 500 1972
8 mil 20, 30 170, 250, 340, 380, 500 1695
10 mil 15, 20, 30 170, 250, 340, 380, 500 1220, 1340
12 mil 12, 20, 30 170, 250, 340, 500 1135
15 mil 20, 30, 40 170, 185, 210, 250, 315, 340 823, 915, 1585
29 mm – 900 Series
8 mil 30 250 1700
Recommended operating pressure: 0,55 bar
Flow rate per outlet: 0,5-1,35 lph
Product Options
Wall Thickness 5, 6, 7, 8, 10, 15 mil
Dripper Spacings 10, 15, 20, 30, 40, 50, 60, 90 cm
Rolls per Pallet Container: 16
Truck: 20
Roll Weight 29 Kg
Roll Length 500 – 3962 m

 

Operating Guidelines
Recommended operating pressure 0,55 bar

 

Operating Pressure by Model
Model Operating Pressure (bar)
505, 706, 707, 908 0,30 – 0,56
506, 708 0,30 – 0,70
508, 510, 512, 515 0,30 – 1,05
710, 712, 715 0,30 – 1,05
Flow Rates
16 mm 90 – 1350 LPH/100 m
22 mm 170 – 500 LPH/100 m
29 mm 250 LPH/100 m

 

Filtration Requirements
LPH Microns Mesh
< 0,65 80 200
0,65-1,2 100 150
> 1,2 130 120
Roll Length – 16 mm
5 mil 3658, 3962 m
6 mil 3050 m
7 mil 1400, 2800 m
8 mil 500, 1150, 2300 m
10 mil 1830 m
12 mil 1550 m
15 mil 1250 m

 

Roll Length – 22 mm
6 mil 2250 m
7 mil 1972 m
8 mil 1695 m
10 mil 1220, 1340 m
12 mil 1135 m
15 mil 823, 915, 1585 m

 

Roll Length – 29 mm
8 mil 1700 m
Emitter Spacing Flow Rate Emission Uniformity 0% Slope
(cm) (lph / 100m) Pressure (0,55 bar) (m)
16 mm
10 1350 90% 61
15 1000 90% 82
15 170 90% 203
20 500 90% 115
20 380 90% 138
20 250 90% 178
20 125 90% 245
30 340 90% 150
30 250 90% 180
30 170 90% 233
50 380 90% 140
22 mm
20 500 90% 205
30 340 90% 265
30 250 90% 315