D1000 Drip Line Copy Copy

D1000 Thin Wall Drip Line Features

The first thin wall drip line to combine the molded emitter from drip lines into the drip tube of tapes that feature a slit outlet.

SYNERGY: THE D1000 STORY

Rivulis is unique with the capability and expertise to manufacture both integrated and inserted molded emitter drip lines. We are one of very few companies that has this capability.

It was only a matter of time until one day the engineering team would ask, “could we combine the best of drip tapes and drip lines into a single product?”
The result – The Rivulis D1000 Drip Line.

The first thin wall drip line to combine the molded emitter from drip lines into the drip tube of tapes that feature a slit outlet.

SLIT OUTLET: PROTECTING YOUR DRIP LINE

Soil ingestion, root intrusion – just some of the risks to the emitters in your drip line.

The key benefit of a slit outlet (as opposed to a hole or flap outlet) is that a slit outlet closes upon system shutoff, helping prevent soil ingestion and root intrusion.

Combined with ActiveFlex™ technology that opens and shuts the outlet, the Rivulis D1000 is ideal for subsurface and under plastic mulch applications to minimize the risk of soil suck-back at system shut-off.

 

 

SYSTEM OPERATION
Emitter flexes to create an opening across the slit outlet

 

 

 

 

 

SYSTEM SHUT-DOWN
Emitter contracts to close slit outlet to help prevent root intrusion & soil ingestion

 

 

 

 

5 Star Certification: CEMEGREF (France)

  • This Test Certificate of D1000 is rated on performance of:
  • Uniformity of flow rate
  • Physical clogging sensitivity
  • Accuracy of flow rate compared to pressure changes
  • Deviation of mean flow rate
Drip Line D1000 molded emitter
Mechanism ActiveFlex™ technology
Flow Rates (l/h) 0.6, 1.0, 1.5
Standard Dripper Spacings (cm) 15, 20, 25, 30, 40
Nominal Drip Line Diameter (mm) 16, 22
Drip Line Wall Thickness 16 mm: 6 and 8 mil | 22 mm: 8 mil
Outlet Slit
Recommended Working Pressure (bar) 0.8 – 1.0 (16/8: 0.8 – 1.2 bar)

Nominal Wall Thickness Internal Nominal Flow Rate Maximum Operating Pressure Roll Length Spacing between Emitters (cm)
Ø Ø Ø 15 20 25 30 40 50
(mm) (mil) (mm) (mm) (l/h) (bar) (m) (m) (m) (m) (m) (m) (m)
16 6 0.2 16.40 16.0 0.6 1 3000 118 144 166 190 229 266
16 6 0.2 16.40 16.0 1.0 1 3000 89 108 126 142 172 199
16 6 0.2 16.40 16.0 1.5 1 3000 68 84 98 111 134 155
16 8 0.2 16.40 16.0 0.6 1.2 2500 118 144 166 190 229 266
16 8 0.2 16.40 16.0 1.0 1.2 2500 91 111 130 147 178 207
16 8 0.2 16.40 16.0 1.5 1.2 2500 71 86 100 113 138 159
22 8 0.2 22.20 22.0 0.6 1 1800 208 247 286 325 392 452
22 8 0.2 22.20 22.0 1.0 1 1800 158 190 220 248 298 345
22 8 0.2 22.20 22.0 1.5 1 1800 121 147 170 191 230 266

* Flow rate calculated at 1.0 bar.

Diameter Wall Spacing Flow Rate Standard Operating Pressure Maximum Operating Pressure Roll Length Roll Weight
(inch) (mil) (inch) (gph) (feet) (lbs)
5/8″ 6 8 0.22 10 14.5 9,840 62
5/8″ 6 8 0.34 10 14.5 9,840 62
5/8″ 6 12 0.22 10 14.5 9,840 62
5/8″ 6 12 0.34 10 14.5 9,840 62
5/8″ 8 8 0.22 10 17 8,200 63
5/8″ 8 8 0.34 10 17 8,200 63
5/8″ 8 12 0.22 10 17 8,200 63
5/8″ 8 12 0.34 10 17 8,200 63
Diameter Wall Spacing Flow Rate Standard Operating Pressure Maximum Operating Pressure Roll Length Roll Weight
(inch) (mil) (inch) (gph) (feet) (lbs)
7/8″ 8 8 0.22 10 13 5,900 57
7/8″ 8 8 0.34 10 13 5,900 57
7/8″ 8 12 0.22 10 13 5,900 57
7/8″ 8 12 0.34 10 13 5,900 57

F2000 Media Filter

F2000 Media Filters (gravel or sand) are the most efficient type of filtration of water heavily
contaminated with algae, organic matter and other impurities found in open reservoirs, canals and recycled water systems.

F3200 Metal Screen Filter with Hydraulic Operation

Great for drip irrigation systems, the F3200 Metal Screen Filter with Hydraulic Operation is highly efficient and self-cleaning. The filters continue to operate during flushing and utilize a small amount of water during flushing, making the filters very efficient.

Air Reliefair_relief_parent_page_image Valve

The Rivulis Air Valves help to protect the system and ensure proper operation, including reduction of soil ingestion upon system shut-down.

Max-Flat Hose

Max-Flat Hose is the most versatile hose available for submain or water transfer applications. The combination of toughness, ease-of-use, and portability makes Max-Flat Hose the right choice for commercial growers everywhere.

Layflat

Pro-Flat Premium PVC Layflat and T-Tape Layflat are made with premium resins which allow the product to withstand the tough farming conditions. Pro-Flat resists elongation and rotation and T-Tape Layflat is made with homogenous construction.

Hose

The PE Hose & Tubing is offered in sizes from 1/2” to 1” in diameter. All of the PE Hose & Tubing products are made with high quality resins.

Drill Bits

Used to drill holes in PVC manifolds. Use grommets when start connectors are inserted into
PVC manifolds.

Hole Punches

To insert Pro-Grip fittings into PE Max-Flat or Hose use either the B400 Hole punch or B700 Hole Punch. These hole punch tools create the hole and insert the fitting in one step.

Layflat Cutters

The Layflat cutters are available in 14, 16, and 19 mm sizes. The 19 mm Layflat cutter is designed to work with the Pro-Grip layflat take-off fittings.

Layflat Spanner and Tee Hex Wrenches

The Spanner and Tee Hex Wrenches help to make installations easier with Pro-Grip Layflat fittings into layflat hoses.