T-Tape Drip Tape

T-Tape Drip Tape

“T-Tape gives us maximum flexibility of product choice. We use 15 cm emitter spacing as it provides the most effective wetting pattern, leading to better crop uniformity and yields.”

 

David Moon, Onion Farmer, Australia

 

Outstanding Agronomic Performance

BEST AGRONOMIC PERFORMANCE

The benefits of closer emitter spacing are numerous, but are all related to more effective water movement.

When irrigating, you want water to move laterally, not deep down through the soil profile where it is either lost (including any fertilizers added) or is harder for plants to uptake. By keeping emitters spaced at close intervals, water flows laterally quicker, ensuring a continued wet strip along the row. In addition, more emitters per meter provides greater protection against crop loss if an emitter becomes blocked.

A great thing is when you use T-Tape, closer emitter spacing intervals do not need to come at an extra cost. Because Rivulis T-Tape has emitters manufactured into the tape itself, as opposed to inserted molded emitters, there is no cost difference per meter between 10 emitters per meter (10 cm spacing) and two emitters per meter (50 cm spacing).

T-Tape helps make your choice of emitter interval spacing an agronomic decision, not one based on your bank account.

NO COMPROMISE: WIDE RANGE OF CONFIGURATIONS

The problem with many drip systems is that you cannot always get the ideal configuration for your unique requirements. Therefore you compromise and in turn, may not achieve the optimum results possible.

Compromise is not an issue when you choose T-Tape which features one of the widest ranges of configurations available including:

7 x Flow rate options from 0.25 l/h – 4.0 l/h
Choose depending on your individual crop, environment and soil requirements

4 x Diameters: 16, 22, 29 and 35 mm.
Larger diameters allow for longer-run lengths while still achieving high uniformity

7 x Wall thickness options: 5 – 15 mil (0.13 – 0.38 mm)
Heavier wall thicknesses are ideal for multi-season, long-term sub-surface, or where additional strength is required

EASY PRODUCT IDENTIFICATION

 

 

 

 

Discover the difference closer emitter spacing can make to your crop. From greater system efficiency, to more uniform yields, close emitter spacing can help you boost your farm profits.

Fortunately with T-Tape there is no additional cost for closer emitter spacing, allowing you to experience the benefits without the extra cost.

Most water will still contain foreign and organic particles even after it has been filtered. Therefore the design of the emitter is critical to help prevent clogging by stopping contaminants from entering the emitter.

A unique feature of T-Tape is the high number of inlet filters each emitter contains.

Every T-Tape emitter contains 13 to 211 inlet filters (depending on configuration).

T-Tape requires just 5 inlet filters open to function correctly. Not only does this provide outstanding protection in every emitter, it also helps T-Tape perform in conditions where other drip lines may fail.

Product* Spacing Emitter Flow Rate Number of Inlets
(cm) (l/h per emitter) (per emitter)
508-10-750 10 0.75 13
508-10-1000 10 1 13
508-15-170 15 0.25 33
508-15-220 15 0.33 52
508-15-340 15 0.51 30
508-15-500 15 0.75 21
508-15-1000 15 1.5 22
510-20-250 20 0.5 17
510-20-380 20 0.75 17
510-20-500 20 1 25
508-25-300 25 0.75 45
508-25-600 25 1.5 62
510-30-170 30 0.5 50
510-30-250 30 0.75 56
510-30-340 30 1 65
515-40-250 40 1 121
515-40-315 40 1.25 121
515-60-210 60 1.25 211

 

* The number of inlet filters does not vary between diameters of T-Tape.
500 series product is specified in this table, but the same specifications of inlet filters also applies to 700, 900 and 1100 series T-Tape where applicable.

Due to T-Tape’s unique design, the tape is folded and welded over itself, in turn creating a strong seam along the entire length of the tape.

Double thickness along the seam helps make T-Tape stronger and therefore easier to retrieve in the field.

In addition, the seam provides an extra layer of protection to the emitter. T-Tape is designed to snap instead of stretch, with the seam design helping protect the in-built emitter from damage, both during installation and retrieval.

T-Tape can perform at low pressure and therefore flow rates are calculated at 0.55 bar.
In some cases, you may increase pressure, which will in turn provide a higher flow rate from each emitter.
For example, if you run T-Tape with 0.50 l/h emitter at 0.80 bar, each emitter will emit 0.62 l/h.
The table below provides a reference of the output per emitter of T-Tape at 0.55, 0.80 and 1.00 bar.

Emitter Flow Rate (l/h)
Based on Nominal Pressure of 0.55 bar 0.25 0.33 0.5 0.75 1 1.25 2
Flow rate (l/h) per emitter @ 0.80 bar 0.32 0.42 0.62 0.89 1.2 1.47 2.31
Flow rate (l/h) per emitter @ 1.00 bar 0.37 0.49 0.7 1 1.35 1.65 2.58

COMMON FILTRATION REQUIREMENTS FOR MOST APPLICATIONS

> 0.5 l/h per emitter: 130 micron / 120 mesh
≤ 0.5 l/h per emitter: 100 micron / 150 mesh

Filtration requirement is dependent on a number of factors including water source and application. Please consult with an irrigation specialist for filtration requirements for your specific application.

PRESSURE GUIDELINES
Minimum operating pressure: 0.30 bar
Recommended operating pressure: 0.55 bar

Description Nominal
Ø
 Wall Thickness
(Nominal)
 Spacing Flow  Rates  Maximum
Run Length
(90% E.U.)
 Roll
Length
Product Number
(mil) (mm) (cm) (l/h per emitter) (l/h per 100m) (m)  (m)
505-10-750 16mm (5/8″) 5 0.13 10 0.75 750 85 3655 101045765
505-15-500 16mm (5/8″) 5 0.13 15 0.75 500 100 3655 101001663
505-20-250 16mm (5/8″) 5 0.13 20 0.5 250 160 3655 101001471
505-20-340 16mm (5/8″) 5 0.13 20 0.65 340 150 3655 101001472
505-20-380 16mm (5/8″) 5 0.13 20 0.75 380 135 3655 101001473
505-20-500 16mm (5/8″) 5 0.13 20 1 500 100 3655 101001474
505-30-170 16mm (5/8″) 5 0.13 30 0.5 170 205 3655 101001475
505-30-250 16mm (5/8″) 5 0.13 30 0.75 250 180 3655 101001476
505-30-340 16mm (5/8″) 5 0.13 30 1 340 150 3655 101001477
506-10-750 16mm (5/8″) 6 0.15 10 0.75 750 85 3050 101008273
506-10-1350 16mm (5/8″) 6 0.15 10 1.35 1350 50 3050 101045761
506-15-170 16mm (5/8″) 6 0.15 15 0.25 170 180 3050 101001678
506-15-220 16mm (5/8″) 6 0.15 15 0.33 220 205 3050 101001995
506-15-340 16mm (5/8″) 6 0.15 15 0.5 340 150 3050 101001043
506-15-340 16mm (5/8″) 6 0.15 15 0.5 340 130 3050 101001996
506-15-500 16mm (5/8″) 6 0.15 15 0.75 500 110 3050 101001679
506-15-1000 16mm (5/8″) 6 0.15 15 1.5 1000 75 3050 WT13088
506-20-125 16mm (5/8″) 6 0.15 20 0.25 125 235 3050 101001478
506-20-250 16mm (5/8″) 6 0.15 20 0.5 250 175 3050 101001479
506-20-380 16mm (5/8″) 6 0.15 20 0.75 380 135 3050 101001480
506-20-500 16mm (5/8″) 6 0.15 20 1 500 115 3050 101001481
506-25-300 16mm (5/8″) 6 0.15 25 0.75 300 155 3050 101001997
506-30-170 16mm (5/8″) 6 0.15 30 0.5 170 230 3050 101001482
506-30-250 16mm (5/8″) 6 0.15 30 0.75 250 175 3050 101001485
506-30-340 16mm (5/8″) 6 0.15 30 1 340 150 3050 101001488
506-40-250 16mm (5/8″) 6 0.15 40 1 250 180 3050 101001691
507-10-1350 16mm (5/8″) 7 0.18 10 1.35 1350 50 2800 WT13085
507-15-1000 16mm (5/8″) 7 0.18 15 1.5 1000 80 2800 WT14982
507-20-500 16mm (5/8″) 7 0.18 20 1 500 110 2800 101014490
507-30-250 16mm (5/8″) 7 0.18 30 0.75 250 180 2800 101022864
507-30-340 16mm (5/8″) 7 0.18 30 1 340 150 2800 101014491
507-40-185 16mm (5/8″) 7 0.18 40 0.75 185 215 2800 WT15158
508-10-750 16mm (5/8″) 8 0.2 10 0.75 750 85 2300 101001490
508-10-1000 16mm (5/8″) 8 0.2 10 1 1000 70 2300 101002004
508-10-1000 – AGS 16mm (5/8″) 8 0.2 10 1 1000 70 2300 101001980
508-10-1350 16mm (5/8″) 8 0.2 10 1.35 1350 50 2300 101045762
508-15-170 16mm (5/8″) 8 0.2 15 0.25 170 205 2300 WT10311
508-15-220 16mm (5/8″) 8 0.2 15 0.33 220 180 2300 101002008
508-15-340 16mm (5/8″) 8 0.2 15 0.5 340 150 2300 101001045
508-15-340 16mm (5/8″) 8 0.2 15 0.5 340 150 2300 101002009
508-15-500 16mm (5/8″) 8 0.2 15 0.75 500 110 2300 101002012
508-15-1000 16mm (5/8″) 8 0.2 15 1.5 1000 75 2300 101001491
508-20-125 16mm (5/8″) 8 0.2 20 0.25 125 235 2300 101002013
508-20-250 16mm (5/8″) 8 0.2 20 0.5 250 175 2300 101001492
508-20-380 16mm (5/8″) 8 0.2 20 0.75 380 135 2300 101001869
508-20-500 16mm (5/8″) 8 0.2 20 1 500 115 2300 101001494
508-25-300 16mm (5/8″) 8 0.2 25 0.75 300 155 2300 101002018
508-25-600 16mm (5/8″) 8 0.2 25 1.5 600 115 2300 101002019
508-30-80 16mm (5/8″) 8 0.2 30 0.25 80 325 2300 101002020
508-30-170 16mm (5/8″) 8 0.2 30 0.5 170 230 2300 101001497
508-30-250 16mm (5/8″) 8 0.2 30 0.75 250 180 2300 101001499
508-30-340 16mm (5/8″) 8 0.2 30 1 340 150 2300 101001500
508-40-125 16mm (5/8″) 8 0.2 40 0.5 125 280 2300 101001709
508-40-185 16mm (5/8″) 8 0.2 40 0.75 185 215 2300 101001710
508-40-250 16mm (5/8″) 8 0.2 40 1 250 180 2300 101001712
508-60-210 16mm (5/8″) 8 0.2 60 1.25 210 205 2300 101001715
510-10-750 16mm (5/8″) 10 0.25 10 0.75 750 85 1830 101001506
510-10-1000 16mm (5/8″) 10 0.25 10 1 1000 75 1830 101002024
510-15-220 16mm (5/8″) 10 0.25 15 0.33 220 180 1830 101002026
510-15-340 16mm (5/8″) 10 0.25 15 0.5 340 150 1830 101002027
510-15-500 16mm (5/8″) 10 0.25 15 0.75 500 110 1830 101002028
510-15-1000 16mm (5/8″) 10 0.25 15 1.5 1000 80 1830 101001508
510-15-1000 16mm (5/8″) 10 0.25 15 1.5 1000 80 1830 101002025
510-20-250 16mm (5/8″) 10 0.25 20 0.5 250 175 1830 101001509
510-20-380 16mm (5/8″) 10 0.25 20 0.75 380 135 1830 101001870
510-20-500 16mm (5/8″) 10 0.25 20 1 500 115 1830 101001511
510-25-600 16mm (5/8″) 10 0.25 25 1.5 600 115 1830 101002031
510-30-170 16mm (5/8″) 10 0.25 30 0.5 170 230 1830 101001512
510-30-250 16mm (5/8″) 10 0.25 30 0.75 250 180 1830 101001514
510-30-340 16mm (5/8″) 10 0.25 30 1 340 150 1830 101001515
510-40-125 16mm (5/8″) 10 0.25 40 0.5 125 240 1830 101001726
510-40-250 16mm (5/8″) 10 0.25 40 1 250 175 1830 101001727
510-40-315 16mm (5/8″) 10 0.25 40 1.25 315 160 1830 101002032
510-50-400 16mm (5/8″) 10 0.25 50 2 400 135 1830 101002034
510-50-800 16mm (5/8″) 10 0.25 50 4 800 85 1830 101002033
510-60-210 16mm (5/8″) 10 0.25 60 1.25 210 205 1830 101001730
512-10-1000 16mm (5/8″) 12 0.3 10 1 1000 80 1550 101002038
512-15-500 16mm (5/8″) 12 0.3 15 0.75 500 115 1550 WT14724
512-20-250 16mm (5/8″) 12 0.3 20 0.5 250 175 1550 101002040
512-20-380 16mm (5/8″) 12 0.3 20 0.75 380 135 1550 101002041
512-20-500 16mm (5/8″) 12 0.3 20 1 500 115 1550 101001737
512-30-170 16mm (5/8″) 12 0.3 30 0.5 170 230 1550 101002039
512-30-250 16mm (5/8″) 12 0.3 30 0.75 250 180 1550 101002043
512-30-340 16mm (5/8″) 12 0.3 30 1 340 150 1550 101001738
512-40-125 16mm (5/8″) 12 0.3 40 0.5 125 240 1550 101002044
512-40-185 16mm (5/8″) 12 0.3 40 0.75 185 215 1550 101002045
512-40-250 16mm (5/8″) 12 0.3 40 1 250 180 1550 101001739
512-40-315 16mm (5/8″) 12 0.3 40 1.25 315 155 1550 101002046
512-50-250 16mm (5/8″) 12 0.3 50 1.25 250 175 1550 101002047
512-50-400 16mm (5/8″) 12 0.3 50 2 400 135 1550 101002048
512-60-210 16mm (5/8″) 12 0.3 60 1.25 210 205 1550 101002049
512-75-267 16mm (5/8″) 12 0.3 75 2 267 175 1550 101002050
515-20-250 16mm (5/8″) 15 0.38 20 0.5 250 175 1250 101001743
515-20-380 16mm (5/8″) 15 0.38 20 0.75 380 135 1250 101001744
515-20-500 16mm (5/8″) 15 0.38 20 1 500 115 1250 101001745
515-30-170 16mm (5/8″) 15 0.38 30 0.5 170 230 1250 101002052
515-30-250 16mm (5/8″) 15 0.38 30 0.75 250 180 1250 101001747
515-30-340 16mm (5/8″) 15 0.38 30 1 340 150 1250 101001748
515-40-125 16mm (5/8″) 15 0.38 40 0.5 125 240 1250 101001750
515-40-185 16mm (5/8″) 15 0.38 40 0.75 185 215 1250 101001751
515-40-250 16mm (5/8″) 15 0.38 40 1 250 180 1250 101001752
515-40-315 16mm (5/8″) 15 0.38 40 1.25 315 155 1250 101002055
515-50-380 16mm (5/8″) 15 0.38 50 1.9 380 135 1250 101001754
515-50-400 16mm (5/8″) 15 0.38 50 2 400 135 1250 101002056
515-50-800 16mm (5/8″) 15 0.38 50 4 800 85 1250 101002057
515-60-210 16mm (5/8″) 15 0.38 60 1.25 210 205 1250 101001757
515-75-267 16mm (5/8″) 15 0.38 75 2 267 175 1250 101002058
515 Header Hose 16mm (5/8″) 15 0.38 1250 101001343

Flow rate calculated at 0.55 bar. Maximum run length based on 90% Emission Uniformity on flat ground.

Description Nominal
Ø
 Wall Thickness
(Nominal)
 Spacing Flow  Rates  Maximum
Run Length
(90% E.U.)
 Roll
Length
Product Number
(mil) (mm) (cm) (l/h per emitter) (l/h per 100m) (m)  (m)
706-15-170 22mm (7/8″) 6 0.15 15 0.25 170 405 2250 101001767
706-15-220-VLF 22mm (7/8″) 6 0.15 15 0.33 220 350 2250 101002059
706-15-340 22mm (7/8″) 6 0.15 15 0.5 340 265 2250 101002060
706-20-250 22mm (7/8″) 6 0.15 20 0.5 250 310 2250 101001521
706-20-380 22mm (7/8″) 6 0.15 20 0.75 380 240 2250 101002061
706-20-500 22mm (7/8″) 6 0.15 20 1 500 200 2250 101001522
706-25-300 22mm (7/8″) 6 0.15 25 0.75 300 280 2250 101002063
706-30-170 22mm (7/8″) 6 0.15 30 0.5 170 405 2250 101001523
706-30-250 22mm (7/8″) 6 0.15 30 0.75 250 315 2250 101001530
706-30-340 22mm (7/8″) 6 0.15 30 1 340 265 2250 101001532
706-40-250 22mm (7/8″) 6 0.15 40 1 250 320 2250 101001776
707-20-250 22mm (7/8″) 7 0.18 20 0.5 250 310 1970 101046746
707-20-380 22mm (7/8″) 7 0.18 20 0.75 380 240 1970 101046745
707-20-500 22mm (7/8″) 7 0.18 20 1 500 200 1970 101014495
707-30-250 22mm (7/8″) 7 0.18 30 0.75 250 315 1970 101014496
707-30-340 22mm (7/8″) 7 0.18 30 1 340 265 1970 101014497
707-40-185 22mm (7/8″) 7 0.18 40 0.75 185 390 1970 WT15159
708-15-170-ULF 22mm (7/8″) 8 0.2 15 0.25 170 405 1695 101002065
708-15-220-VLF 22mm (7/8″) 8 0.2 15 0.33 220 350 1695 101002066
708-15-340 22mm (7/8″) 8 0.2 15 0.5 340 265 1695 101002067
708-15-500 22mm (7/8″) 8 0.2 15 0.75 500 200 1695 101002068
708-20-125-ULF 22mm (7/8″) 8 0.2 20 0.25 125 430 1695 101002069
708-20-250 22mm (7/8″) 8 0.2 20 0.5 250 310 1695 101001534
708-20-380 22mm (7/8″) 8 0.2 20 0.75 380 240 1695 101001871
708-20-500 22mm (7/8″) 8 0.2 20 1 500 200 1695 101001535
708-25-300 22mm (7/8″) 8 0.2 25 0.75 300 280 1695 101002070
708-25-600 22mm (7/8″) 8 0.2 25 1.5 600 200 1695 101002071
708-30-170 22mm (7/8″) 8 0.2 30 0.5 170 405 1695 101001536
708-30-250 22mm (7/8″) 8 0.2 30 0.75 250 315 1695 101001542
708-30-340 22mm (7/8″) 8 0.2 30 1 340 265 1695 101001543
708-40-185 22mm (7/8″) 8 0.2 40 0.75 185 390 1695 101014482
708-40-250 22mm (7/8″) 8 0.2 40 1 250 320 1695 101001788
710-15-220 22mm (7/8″) 10 0.25 15 0.33 220 350 1340 101002072
710-15-340 22mm (7/8″) 10 0.25 15 0.5 340 265 1340 101001049
710-15-340 22mm (7/8″) 10 0.25 15 0.5 340 265 1340 101002078
710-20-250 22mm (7/8″) 10 0.25 20 0.5 250 310 1340 101001544
710-20-380 22mm (7/8″) 10 0.25 20 0.75 380 240 1340 101001873
710-20-500 22mm (7/8″) 10 0.25 20 1 500 200 1340 101001545
710-30-170 22mm (7/8″) 10 0.25 30 0.5 170 405 1340 101001546
710-30-250 22mm (7/8″) 10 0.25 30 0.75 250 315 1340 101001553
710-30-340 22mm (7/8″) 10 0.25 30 1 340 265 1340 101001554
710-40-315 22mm (7/8″) 10 0.25 40 1.25 315 275 1340 101002079
710-50-800 22mm (7/8″) 10 0.25 50 4 800 150 1340 101002080
710-60-210 22mm (7/8″) 10 0.25 60 1.25 210 360 1340 101001804
712-20-250 22mm (7/8″) 12 0.3 20 0.5 250 310 1135 WT14453
712-20-250 22mm (7/8″) 12 0.3 20 0.5 250 310 1135 101002082
712-20-380 22mm (7/8″) 12 0.3 20 0.75 380 240 1135 101002083
712-20-500 22mm (7/8″) 12 0.3 20 1 500 200 1135 101002084
712-30-170 22mm (7/8″) 12 0.3 30 0.5 170 405 1135 101002085
712-30-250 22mm (7/8″) 12 0.3 30 0.75 250 315 1135 101002089
712-30-340 22mm (7/8″) 12 0.3 30 1 340 265 1135 101002090
712-40-125 22mm (7/8″) 12 0.3 40 0.5 125 490 1135 101002091
712-40-185 22mm (7/8″) 12 0.3 40 0.75 185 390 1135 101002092
712-40-250 22mm (7/8″) 12 0.3 40 1 250 320 1135 101002093
712-40-315 22mm (7/8″) 12 0.3 40 1.25 315 275 1135 101002094
712-50-400 22mm (7/8″) 12 0.3 50 2 400 235 1135 101002095
712-60-210 22mm (7/8″) 12 0.3 60 1.25 210 360 1135 101002096
712-75-267 22mm (7/8″) 12 0.3 75 2 267 310 1135 101002097
715-20-250 22mm (7/8″) 15 0.38 20 0.5 250 310 914 101023135
715-20-380 22mm (7/8″) 15 0.38 20 0.75 380 240 915 101002108
715-20-500 22mm (7/8″) 15 0.38 20 1 500 200 915 101001806
715-30-170 22mm (7/8″) 15 0.38 30 0.5 170 405 915 101001558
715-30-170 22mm (7/8″) 15 0.38 30 0.5 170 405 915 101001555
715-30-170 22mm (7/8″) 15 0.38 30 0.5 170 405 915 101002119
715-30-250 22mm (7/8″) 15 0.38 30 0.75 250 315 915 101001814
715-30-340 22mm (7/8″) 15 0.38 30 1 340 265 915 101001815
715-37.5-267 22mm (7/8″) 15 0.38 37.5 1 267 310 915 101002109
715-37.5-533 22mm (7/8″) 15 0.38 37.5 2 533 200 915 101002110
715-40-185 22mm (7/8″) 15 0.38 40 0.75 185 390 915 101002111
715-40-210 22mm (7/8″) 15 0.38 40 0.85 210 360 915 101001817
715-40-250 22mm (7/8″) 15 0.38 40 1 250 320 915 101001818
715-40-315 22mm (7/8″) 15 0.38 40 1.25 315 275 915 101002113
715-50-400 22mm (7/8″) 15 0.38 50 2 400 235 915 101002115
715-50-800 22mm (7/8″) 15 0.38 50 4 800 150 915 101002114
715-60-210 22mm (7/8″) 15 0.38 60 1.25 210 360 915 101001819
715-60-350 22mm (7/8″) 15 0.38 60 2 350 260 915 101002116
715-75-267 22mm (7/8″) 15 0.38 75 2 267 310 915 101002117
715-75-533 22mm (7/8″) 15 0.38 75 4 533 200 915 101002118
715 Header Hose 22mm (7/8″) 15 0.38 915 101001348

Flow rate calculated at 0.55 bar. Maximum run length based on 90% Emission Uniformity on flat ground.

Description Nominal
Ø
 Wall Thickness
(Nominal)
 Spacing Flow  Rates  Maximum
Run Length
(90% E.U.)
 Roll
Length
Product Number
(mil) (mm) (cm) (l/h per emitter) (l/h per 100m) (m)  (m)
908-15-170 29mm (9/8″) 8 0.2 15 0.25 170 540 1700 101002120
908-20-125 29mm (9/8″) 8 0.2 20 0.25 125 660 1700 101002121
908-20-250 29mm (9/8″) 8 0.2 20 0.5 250 480 1700 101002122
908-20-500 29mm (9/8″) 8 0.2 20 1 500 315 1700 101002123
908-30-250 29mm (9/8″) 8 0.2 30 0.75 250 480 1700 101002124
908-30-340 29mm (9/8″) 8 0.2 30 1 340 405 1700 101002125
908-40-250 29mm (9/8″) 8 0.2 40 1 250 480 1700 101002127
908-40-315 29mm (9/8″) 8 0.2 40 1.25 315 430 1700 101002128
908-50-400 29mm (9/8″) 8 0.2 50 2 400 365 1700 101002129
908-60-210 29mm (9/8″) 8 0.2 60 1.25 210 560 1700 101002130
910-15-220 29mm (9/8″) 10 0.25 15 0.33 220 540 1345 101002131
910-20-250 29mm (9/8″) 10 0.25 20 0.5 250 480 1345 101002136
910-20-380 29mm (9/8″) 10 0.25 20 0.75 380 370 1345 101002137
910-20-500 29mm (9/8″) 10 0.25 20 1 500 315 1345 101002138
910-30-170 29mm (9/8″) 10 0.25 30 0.5 170 620 1345 101002139
910-30-250 29mm (9/8″) 10 0.25 30 0.75 250 480 1345 101002140
910-30-340 29mm (9/8″) 10 0.25 30 1 340 405 1345 101002141
910-40-250 29mm (9/8″) 10 0.25 40 1 250 480 1345 101002142
910-40-315 29mm (9/8″) 10 0.25 40 1.25 315 430 1345 101002143
912-20-250 29mm (9/8″) 12 0.3 20 0.5 250 480 1150 101002151
912-20-380 29mm (9/8″) 12 0.3 20 0.75 380 370 1150 101002146
912-20-500 29mm (9/8″) 12 0.3 20 1 500 315 1150 101002147
912-30-170 29mm (9/8″) 12 0.3 30 0.5 170 620 1150 101047902
912-30-250 29mm (9/8″) 12 0.3 30 0.75 250 480 1150 101002152
912-30-340 29mm (9/8″) 12 0.3 30 1 340 405 1150 101002153
912-40-185 29mm (9/8″) 12 0.3 40 0.75 185 600 1150 101002155
912-40-250 29mm (9/8″) 12 0.3 40 1 250 480 1150 101002156
912-40-315 29mm (9/8″) 12 0.3 40 1.25 315 430 1150 101002157
912-50-400 29mm (9/8″) 12 0.3 50 2 400 365 1150 101002158
912-60-210 29mm (9/8″) 12 0.3 60 1.25 210 560 1150 101002159
915-20-250 29mm (9/8″) 15 0.38 20 0.5 250 480 925 101002172
915-20-500 29mm (9/8″) 15 0.38 20 1 500 315 925 101002173
915-30-170 29mm (9/8″) 15 0.38 30 0.5 170 650 925 101002174
915-30-250 29mm (9/8″) 15 0.38 30 0.75 250 480 925 101002175
915-30-340 29mm (9/8″) 15 0.38 30 1 340 405 925 101002176
915-40-185 29mm (9/8″) 15 0.38 40 0.75 185 600 925 101047903
915-40-250 29mm (9/8″) 15 0.38 40 1 250 480 925 101002177
915-40-315 29mm (9/8″) 15 0.38 40 1.25 315 430 925 101002178
915-50-400 29mm (9/8″) 15 0.38 50 2 400 365 925 101002179
915-60-210 29mm (9/8″) 15 0.38 60 1.25 210 560 925 101002180
915-60-310 29mm (9/8″) 15 0.38 60 1.85 310 435 925 101002181
915 HEADER HOSE 29mm (9/8″) 15 0.38 925 101047901

Flow rate calculated at 0.55 bar. Maximum run length based on 90% Emission Uniformity on flat ground.

Description Nominal
Ø
 Wall Thickness
(Nominal)
 Spacing Flow  Rates  Maximum
Run Length
(90% E.U.)
 Roll
Length
Product Number
(mil) (mm) (cm) (l/h per emitter) (l/h per 100m) (m)  (m)
1115-30-250 35mm (1 1/8″) 15 0.38 30 0.75 250 680 823 101001829
1115-30-340 35mm (1 1/8″) 15 0.38 30 1 340 570 823 101001830
1115-40-250 35mm (1 1/8″) 15 0.38 40 1 250 690 823 101001832
1115 HEADER HOSE 35mm (1 1/8″) 15 0.38 823 101001350

Flow rate calculated at 0.55 bar. Maximum run length based on 90% Emission Uniformity on flat ground.

If you need even more tensile strength than T-Tape drip tape’s already reinforced design, T-TapeS is your answer.
Manufactured with some of the most advanced extrusion technology in drip irrigation, T-TapeS provides outstanding tensile strength making it ideal for situations where retrieval may be a challenge.


T-TapeS is easily identified with its signature green stripe (Europe only).

Description Nominal
Ø
Wall Thickness
(Nominal)
Spacing Flow Rates Maximum
Run Length
(90% E.U.)
Roll
Length
Product Number
(mil) (mm) (cm) (l/h per emitter) (l/h per 100m) (m) (m)
T-TapeS | 505-15-170 16mm (5/8″) 5 0.13 15 0.25 170 205 3655 WT14682
T-TapeS | 505-20-125 16mm (5/8″) 5 0.13 20 0.25 125 245 3655 WT14683
T-TapeS | 505-22.5-110 16mm (5/8″) 5 0.13 22.5 0.25 110 250 3655 WT14685
T-TapeS | 506-15-170 16mm (5/8″) 6 0.15 15 0.25 170 205 3050 WT13929
T-TapeS | 506-15-500 16mm (5/8″) 6 0.15 15 0.75 500 110 3050 101049169
T-TapeS | 506-20-125 16mm (5/8″) 6 0.15 20 0.25 125 245 3050 WT14688
T-TapeS | 506-20-500 16mm (5/8″) 6 0.15 20 1 500 115 3050 101047870
T-TapeS | 506-30-170 16mm (5/8″) 6 0.15 30 0.5 170 230 3050 WT14691
T-TapeS | 506-30-250 16mm (5/8″) 6 0.15 30 0.75 250 180 3050 101049143
T-TapeS | 506-30-340 16mm (5/8″) 6 0.15 30 1 340 150 3050 101049142
T-TapeS | 706-15-170 22mm (7/8″) 6 0.15 15 0.25 170 355 2250 WT13928
T-TapeS | 706-20-200 22mm (7/8″) 6 0.15 20 0.4 200 330 2250 WT14693
T-TapeS | 706-20-250 22mm (7/8″) 6 0.15 20 0.5 250 310 2250 101046259
T-TapeS | 706-30-170 22mm (7/8″) 6 0.15 30 0.5 170 405 2250 WT14697
T-TapeS | 706-30-250 22mm (7/8″) 6 0.15 30 0.75 250 315 2250 WT15709
T-TapeS | 706-30-340 22mm (7/8″) 6 0.15 30 1 340 265 2250 WT15217

Flow rate calculated at 0.55 bar. Maximum run length based on 90% Emission Uniformity on flat ground.