D1500 Drip Line

D1500 Thin Wall Drip Line Features

  • Outstanding clogging resistance
  • One of the largest inlet filters and for flat drip emitters on the market
  • Large labyrinth cross sections resist clogging

 

Trusted by farmers worldwide for over 25 years

“Using D1500 drip irrigation, I achieved 15% higher yields, irrigated 2.5 times more area with the same amount of water, and saved 65% in energy costs compared to sprinkler irrigation”
Mehmet Bakim, 300 ha Sugar beet grower, Turkey

 

 

Trusted: Outstanding clogging resistance

INLET FILTERS
Rivulis D1500 features one of the largest inlet filters for flat drip emitters on the market.

The additional filtration area provides outstanding protection against clogging.

LABYRINTH
Regardless of how good an emitter’s inlet filters are, Inevitably some particles will enter the labyrinth. When this occurs, it is important to have a large cross section (width x height) so the particles can pass easily and not clog the emitter.

Once again, Rivulis D1500 design has one of the largest labyrinth cross sections on the market.

Drip Line D1500
Flow Rates (l/h) 0.8, 1.3, 1.6, 2.6, 3.6
Standard Emitter Spacings 15 - 100 cm (depending on wall thickness and flow rate)
Nominal Drip Line Diameter (mm) 16 (ID) /17 (OD) | 22 (ID) /23 (OD)
Drip Line Wall Thickness 16 mm: 5, 6 , 8 , 10, 12, 15, 18, 25 mil
(0.135, 0.15, 0.20 , 0.25, 0.30, 0.37, 0.45 , 0.60 mm)
22 mm: 8, 10, 12, 15, 18, 25 mil (0.20 , 0.25, 0.30, 0.37, 0.45 , 0.60 mm)
Outlet Hole outet

Nominal Ø Wall Thickness Internal Ø Outside Ø Flow Rate Maximum Operating Pressure Roll Length Spacing between Emitters (cm)
15 20 25 30 40 50 60  75
(mm) (mil) (mm) (mm) (mm) (l/h) (bar) (m) (m) (m) (m) (m) (m) (m) (m) (m)
16 5 0.135 16.1 16.37 0.8 0.8 2700 (15 cm)
2800 (20 cm)
2900 (25 cm)
3000 (≥ 30cm)
98 121 142 161 197 230 260 302
16 16.1 1.2 74 91 108 122 149 174 197 229
16 16.1 1.5 64 79 93 106 129 151 170 198
16 16.1 2.4 49 60 70 80 98 114 128 149
16 16.1 3.6 35 44 52 58 72 84 95 110
16 6 0.15 16.1 16.4 0.8 1 2300 (15 cm)
2400 (20 cm)
2500 (25 cm)
2600 (≥ 30cm)
98 122 143 162 198 232 262 305
16 16.1 1.2 74 91 108 122 149 174 197 229
16 16.1 1.5 64 79 93 106 129 151 170 198
16 16.1 2.4 49 60 71 80 98 114 129 150
16 16.1 3.6 36 44 52 59 72 84 95 111
16 8 0.2 16.1 16.5 0.8 1.2 2200 (15 cm)
2300 (20 cm)
2400 (25 cm)
2500 (≥ 30cm)
100 124 146 166 203 237 268 311
16 16.1 1.2 76 94 110 125 153 179 202 236
16 16.1 1.5 64 79 93 106 129 151 170 198
16 16.1 2.4 51 62 73 83 101 118 133 155
16 16.1 3.6 36 44 52 59 72 85 95 111
16 10 0.25 16.1 16.6 0.8 1.4 1800 (15 cm)
2000 (20 cm)
2100 (25 cm)
2300 (≥ 30cm)
101 125 147 167 204 238 269 313
16 16.1 1.2 76 94 110 125 153 179 202 236
16 16.1 1.5 64 79 93 106 129 151 170 198
16 16.1 2.4 51 62 73 83 102 119 134 155
16 16.1 3.6 36 44 52 59 72 85 96 112
16 12 0.3 16.1 16.7 0.8 1.5 1300 (15 cm)
1400 (20 cm)
1500 (25 cm)
1700 (≥ 30cm)
101 125 147 167 204 238 269 314
16 16.1 1.2 76 94 110 125 153 179 202 236
16 16.1 1.5 67 83 97 110 135 157 178 207
16 16.1 2.4 51 63 73 83 102 119 134 156
16 16.1 3.6 36 44 52 59 73 85 96 112
16 15 0.37 16.1 16.85 0.8 1.8 1050 (15 cm)
1150 (20 cm)
1200 (25 cm)
1300 (≥ 30cm)
101 125 148 168 205 240 271 315
16 16.1 1.2 76 94 110 125 153 179 202 236
16 16.1 1.5 67 83 97 110 135 157 178 207
16 16.1 2.4 51 63 74 84 102 119 134 157
16 16.1 3.6 36 45 52 60 73 85 97 113
16 18 0.45 16.1 17 0.8 2 800 (15 cm)
900 (20 cm)
950 (25 cm)
1000 (≥ 30cm)
102 126 148 168 206 240 272 316
16 16.1 1.2 76 94 110 125 153 179 202 236
16 16.1 1.5 67 83 97 110 135 157 178 207
16 16.1 2.4 51 63 74 84 102 119 135 157
16 16.1 3.6 36 45 53 60 73 86 97 113
16 25 0.61 16.1 17.3 0.8 2.5 700 (15 cm)
750 (20 cm)
800 (25 cm)
850 (≥ 30 cm)
101 124 146 167 204 238 269 314
16 16.1 1.2 76 94 110 125 153 179 202 236
16 16.1 1.5 64 79 93 106 129 151 170 198
16 16.1 2.4 51 63 74 84 103 120 136 158
16 16.1 3.6 36 45 53 60 74 86 97 113

 

Nominal Ø Wall Thickness Internal Ø Outside Ø Flow Rate Maximum Operating Pressure Roll Length Spacing between Emitters (cm)
15 20 25 30 40 50 60 75
(mm) (mil) (mm) (mm) (mm) (l/h) (bar) (m) (m) (m) (m) (m) (m) (m) (m) (m)
22 8 0.2 22.2 22.6 0.8 1 1500 (15 cm)
1600 (20 cm)
1700 (25 cm)
1800 (≥ 30cm)
170 211 249 284 349 408 463 540
22 22.2 1.2 127 158 187 213 261 306 347 404
22 22.2 1.5 112 139 164 187 230 269 305 356
22 22.2 2.4 84 105 123 140 172 201 227 265
22 22.2 3.6 59 74 87 100 122 144 163 190
22 10 0.25 22.2 22.7 0.8 1.3 1300 (15 cm)
1400 (20 cm)
1500 (25 cm)
1600 (≥ 30cm)
170 212 251 286 352 412 467 544
22 22.2 1.2 127 158 186 212 261 305 346 404
22 22.2 1.5 111 139 164 187 230 269 305 355
22 22.2 2.4 85 105 124 141 173 202 229 266
22 22.2 3.6 59 74 88 100 123 144 164 191
22 12 0.3 22.2 22.8 0.8 1.4 1150 (15 cm)
1250 (20 cm)
1350 (25 cm)
1450 (≥ 30cm)
171 213 251 287 352 412 468 545
22 22.2 1.2 127 158 186 212 261 305 346 404
22 22.2 1.5 111 139 164 187 230 269 305 355
22 22.2 2.4 85 105 124 141 173 202 229 267
22 22.2 3.6 59 74 88 100 123 145 164 191
22 15 0.38 22.2 22.96 0.8 1.6 950 (15 cm)
1050 (20 cm)
1150 (25 cm)
1250 (≥ 30cm)
171 213 252 288 354 414 470 548
22 22.2 1.2 127 158 186 212 261 305 346 404
22 22.2 1.5 111 139 164 187 230 269 305 355
22 22.2 2.4 85 105 124 142 174 203 230 268
22 22.2 3.6 60 74 88 100 124 145 164 192
22 18 0.46 22.2 23.12 0.8 1.8 500 (15 cm)
600 (20 cm)
650 (25 cm)
700 (≥30 cm)
172 214 253 289 355 415 471 549
22 22.2 1.2 127 158 186 212 261 305 346 404
22 22.2 1.5 111 139 164 187 230 269 305 355
22 22.2 2.4 85 106 125 142 174 204 230 269
22 22.2 3.6 60 75 88 101 124 145 165 192
22 25 0.61 22.2 23.42 1.2 2 350 (15 cm)
400 (20 cm)
450 (25 cm)
500 (≥ 30 cm)
120 150 177 202 248 291 329 384
22 22.2 1.5 111 139 164 187 230 269 305 355
22 22.2 2.4 85 106 125 142 174 204 231 269

 

Key System Components

Drip Line Fittingsdripline-fitting-cropped
  • High quality fittings for drip lines
  • Insert line includes couplers, reducers, start connectors, clamps, and barbed fittings

F2000 Media Filter

F2000 Media Filters (gravel or sand) are the most efficient type of filtration of water heavily
contaminated with algae, organic matter and other impurities found in open reservoirs, canals and recycled water systems.

F3200 Metal Screen Filter with Hydraulic Operation

Great for drip irrigation systems, the F3200 Metal Screen Filter with Hydraulic Operation is highly efficient and self-cleaning. The filters continue to operate during flushing and utilize a small amount of water during flushing, making the filters very efficient.

Air Reliefair_relief_parent_page_image Valve

The Rivulis Air Valves help to protect the system and ensure proper operation, including reduction of soil ingestion upon system shut-down.

Max-Flat Hose

Max-Flat Hose is the most versatile hose available for submain or water transfer applications. The combination of toughness, ease-of-use, and portability makes Max-Flat Hose the right choice for commercial growers everywhere.

Layflat

Pro-Flat Premium PVC Layflat and T-Tape Layflat are made with premium resins which allow the product to withstand the tough farming conditions. Pro-Flat resists elongation and rotation and T-Tape Layflat is made with homogenous construction.

Hose

The PE Hose & Tubing is offered in sizes from 1/2” to 1” in diameter. All of the PE Hose & Tubing products are made with high quality resins.